Chicago Pneumatic Air Hammer
|
Part Number: ________________ -EXT-CP715 |
| The correct air pressure to run this tool from your Extractor kit is between 80 to 90 PSI. The compressor must run a minimum of 3 to 4 CFM to effectively operate the Extractor. The Chicago Pneumatic Air Hammer CP715 only has two moving parts; a cycling valve for air flow and a piston that drives the shaft. The CP715 now features a new machined aluminum handle, making it stronger and tougher than before. | |
Batteries
|
Part Numbers: ________________ Milwaukee: -18v NiCad: EXT-BATTERY-48112230 -18v Lithium: EXT-BATTERY-48111830 -28v Lithium: EXT-BATTERY-48112830 deWalt: -18v NiCad: EXT-BATTERY-DW9096 -24v NiCad: EXT-BATTERY-DW0242 |
|
New technology cordless power for all Milwaukee model Extractors. -No power curve -100% power throughout the battery charge -No memory -One hour smart charge |
|
Blades
|
Part Numbers: ________________ -10” Blade: EXT-DELTA-XXXL -9” Blade: EXT-DELTA-XXL -7¾” Blade: EXT-DELTA-XL -6¾” Blade: EXT-DELTA-L -6” Blade: EXT-DELTA-REG -5¾” Narrow Blade: EXT-BLDN |
| The blades are made from spring steel, have been laser cut, and tapered to our custom specs. Each blade, as always, comes from a single sheet of steel. That means no welds nor two piece blades, making these the toughest Extractor blades yet to be produced. If used correctly, they should last approximately 200 cutouts or more. That's only $0.15 per cut out. These blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade. | |
Steel Shafts
|
Part Numbers: ________________ -Large Shaft: EXT-SHL -Small Shaft:EXT-SHS |
|
Steel shafts are for the air kits only. Both shafts are made from a hardened steel. The shaft was designed to work with the piston inside a CP715 air hammer. Any use in another air hammer may result in damage to your air hammer or shaft and will void all warranty. Shafts and blades sold separately. |
|
Swivel Shafts
|
Part Number: ________________ -EXT-SHD7-SWIVELSHAFT |
| 7” shaft for all Milwaukee models. Swivels 90o right and 90o left for 180 degree rotation. | |
Products / Accessories
